|
This is an incomplete list of European standards maintained by CEN (European Committee for Standardization), CENELEC (European Committee for Electrotechnical Standardization) and ETSI (European Telecommunications Standards Institute): == EN 1–999 == * EN 1: Flued oil stoves with vaporizing burners * EN 2: Classification of fire * EN 3: Portable fire extinguishers * EN 54: Fire detection and fire alarm systems * EN 71: Safety of toys * EN 81: Safety of lifts * EN 115: Safety of escalators & Moving walks * EN 166: Personal eye protection. Specifications * EN 196: Methods for testing cement (10 parts) * EN 197-1: Cement – Part 1 : Composition, specifications and conformity criteria for common cements * EN 197-2: Cement – Part 2 : Conformity evaluation * EN 206-1: Concrete – Part 1: Specification, performance, production and conformity * EN 207: Classification and specifications of filters and eye protection against laser * EN 208: Classification of eye protection filters for laser alignment * EN 228: Specifications for automotive petrol * EN 250: Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking * EN 287-1: "Qualification test of welders — Fusion welding — Part 1: Steels" (2011) * EN 294: Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs * EN 298: Automatic gas burner control systems for gas burners and gas burning appliances with or without fans * EN 336: Structural timber — Sizes, permitted deviations * EN 338: Structural timber — Strength classes * EN 341: Personal protective equipment against falls from a height. Descender devices * EN 352-2: Revised 2002 standards on hearing protectors. Safety requirements and testing, generally about earplugs. * EN 353-1: Personal protective equipment against falls from a height. Guided type fall arresters including a rigid anchor * EN 353-2: Personal protective equipment against falls from a height. Guided type fall arresters including a flexible anchor line * EN 354: Personal protective equipment against falls from a height. Lanyards * EN 355: Personal protective equipment against falls from a height. Energy absorbers * EN 358: Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards * EN 360: Personal protective equipment against falls from a height. Retractable type fall arresters * EN 361: Personal protective equipment against falls from a height. Full body harnesses * EN 362: Personal protective equipment against falls from a height. Connectors * EN 363: Personal protective equipment against falls from a height. Fall arrest systems * EN 374: Protective gloves against chemicals and micro-organisms * EN 381: Protective clothing for chainsaw users, e.g. trousers, jackets, gloves, boots/gaiters. * EN 386: Glued laminated timber - Performance requirements and minimum production requirements * EN 388: Protective gloves against mechanical risks * EN 390: Glued laminated timber. Sizes. Permissible deviations * EN 391: Glued laminated timber - Delamination tests of glue lines * EN 392: Glued laminated timber - Shear test of glue lines * EN 397: Specification for industrial safety helmets * EN 408: Structural timber and glued laminated timber — Determination of some physical and mechanical properties * EN 417: Non-refillable metallic cartridges for liquefied petroleum gases * EN 420: Protective gloves. General requirements and test methods * EN 438: Decorative high-pressure laminates (HPL) sheets based on thermosetting resins. * EN 440: "Welding consumables wire electrodes and deposits for gas shielded metal arc welding of non-alloy and fine grain steel - Classification" (1994) * EN 474: Earth-moving Machinery. Safety. General Requirements * EN 450: Fly ash for concrete - Definitions, requirements and quality control * EN 518: Structural timber. Grading. Requirements for visual strength grading standards (replaced by EN 14081-1) * EN 519: Structural timber. Grading. Requirements for machine strength graded timber and grading machines (Replaced by EN 14081-1) * EN 567: Mountaineering equipment. Rope clamps. Safety requirements and test methods * EN 590: Specification for automotive diesel * EN 694: Fire-fighting hoses. Semi-rigid hoses for fixed systems * EN 716: Children's cots and folding cots for domestic use * EN 795: Protection against falls from a height. Anchor devices. Requirements and testing * EN 805: Water supply. Requirements for systems and components outside buildings * EN 813: Personal protective equipment for prevention of falls from a height. Sit harnesses * EN 837: Pressure connections * EN 840: Mobile waste containers. * EN 877: Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance * EN 933-1: Test for geometrical properties of aggregates - Part 1: determination of particle size distribution - Sieving method * EN 934-2: Admixtures for concrete, mortar and grout - Part 2: concrete admixtures - Definitions and requirements * EN 962-1: Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength * EN 962-2: Paragliding equipment - Paragliders - Part 2: Requirements and test methods for classifying flight safety characteristics 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「List of EN standards」の詳細全文を読む スポンサード リンク
|